1. Power off your modem, and remove and reinstall its battery (if any).
2. Use the included Ethernet cable to connect a LAN port of your modem to the WAN port of any Nova MW6 unit.
3. Use one of the included power adapters to connect the nova unit to a power source.
4. Power on your modem.
B. Install the Tenda WiFi app
DOWNLOAD the Tenda WiFi app on your mobile device by searching for Tenda WiFi in App Store or Google Play or by scanning the following QR code. Then install the app.
C. Connect the mobile device to the Nova MW6 unit
Go to the WiFi network list on your mobile device, select the SSID of the Nova unit, and enter its password. The SSID and password are specified on the label of the Nova unit.
D. Connect the other Nova MW6 units to the Internet
1. Place each nova unit Less than 45 feet from another
2. Use the other included power adapters to connect the remaining Nova MW6 units to power sources.
3. Wait about 1 minute until each nova unit's LED lights one of the following colors:
Solid blue: Good connection
Solid yellow: Fair connection
Solid magenta: Poor connection
Solid red: Disconnected
4. If a nova unit's LED does not light solid blue, move the unit closer to another to get it better connected.
Now you can enjoy a seamless and reliable internet experience on your WiFi devices.
*****
Tenda Mesh Nova MW6 Installation Guide manual help for technician radio/TV experienced an or dealer the Consult — connected. is a receiver which to that from different circuit an on outlet into equipment Connect receiver. and between separation Increase antenna. receiving relocate Reorient measures: following of more one by interference correct try encouraged user on, off turning determined be can reception, television radio harmful cause does this If installation. particular in occur not will guarantee no there However, communications. may instructions, with accordance use installed if and, energy frequency radiate uses generates.
Tenda Mesh Nova MW6 Installation Guide manual. This residential against protection reasonable provide designed are limits These Rules? FCC Part pursuant device, digital B Class comply found tested been has V1.0.0 Version: Software 22.21dBm GHz: 19.67dBm 2.4 (Max.): Power EIRP (CH36-CH48) EU/5150-5250MHz (CH1-CH13) EU/2400-2483.5MHz Frequency:
Operate Tenda com/en/service/download -101.html address: internet at available conformity declaration EU text full The 2014/53/EU. Directive compliance Mesh3 type declares LTD. CO. TECHNOLOGY TENDA SHENZHEN Hereby, Conformity Declaration body. your & radiator 20cm distance minimum operated should only. use indoor restricted band 5.15-5.25GHz Operations measures. adequate take required case radio interference, product environment, domestic In product. cable. RJ45 shielded recommended it interference, radiation unnecessary avoid To (2) equipment. modifications unauthorized caused TV any responsible manufacturer
Comments