Tenda 06 WiFi Access Point Router Extender
- 5GHz 433Mbps outdoor Point to Point CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission.
- With an external power amplifier and a built-in 16dBi directional antenna to provide an efficient way to pick up and maintains a stable signal for a wireless network connection range up to 10 kilometers.
Features & Specifications
- Frequency Range: 5GHz
- Maximum wireless speed: 433Mbps
- CPU Processor: Broadcom 800MHz
- GND Terminal: 1
- Interface: 1 x GE PoE/WAN/LAN port
- Mode Switch :
Station: The device only works in Station mode
Off: The device work on
AP/Station/Universal Repeater/WISP/Router mode
AP: The device only work in AP mode
- Button : Reset: Press 10 seconds or more to restore to default settings, Bridge: Press 3 seconds and release it to bridge uplink AP
- Antenna: 16dbi Directional Antenna
- Antenna Beamwidth : Horizontal: 30, Vertical: 15
- Maximum Consumption: 9W
- Lightning Protection: 6KV
- Waterproof Level: IP64
- Power Supply: 24v 0.5A PoE Injector
- Operating mode: AP/Station/Universal Repeater/WISP/Router
- Standard&Protocol : IEEE 802.11ac/n/a
- Wireless Speed: Enable/Disable Wireless Radio, SSID Hidden, Wireless Client isolation, Sensitivity Threshold, WMM Capable, APSD Capable, Wireless Access Control, Wireless Client list
- Wireless Security : 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2
- Transmit Power, Adjustable power by 1dBm
- Reception Sensitivity : MCS0: -90dbm, MCS7: -72dbm
- DHCP Server: DHCP Server, Clients list
- VPN Pass-through : PPTP,L2TP
- Ping Watchdog: Support
- Speed Test: Support
- Remote Web access: Support
- Schedule Reboot: Support
- Page Timeout: Support
- Dyndns: noip, dyndnsorg
- Network Diagnoses: Ping, Traceroute, Signal Scan
- Management Tool: Time&Date Setting, System Log, Firmware update, Backup/Restore Configuration, Username Management
FIRMWARE
((DOWNLOAD))
- Please choose the correct version to upgrade for the device to follow local country regulations
- It is NOT suggested to upgrade firmware which is not for your region.
- Firmware Version: V1.0.0.13(4741)
Release Note:
1. This version is compliant with FCC standard.
2. Fix the issue that NVR can't scan IP camera automatically through long-range CPE connection.
3. Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.
4. After upgrading, please restore it to factory defaults and configure the device again.
*****
Tenda 06 10KM Outdoor WiFi AP Extender & Firmware Software alignment. optimum ensure installing when feedback instant provides This node. connected strength current represents Lights signal Three LED Indicator Signal Smart O6_6.jpg button. Bridge/RST push at together bridged devices two modes, Station(Client) another set node one When UI. web login without Station AP switched device switch. mode operating with comes achieved. be can 10+Km of an antenna, 16dBi amplifier power external an from Benefiting applications. point range long outdoor for designed specially is Transmission Data Wireless 10km+ connection. wireless on performance throughput the boost to port Ethernet gigabit includes and technology adopts O6 The 433Mbps 11AC 5GHz.
10+Km 10km+ 11AC 16dBi 433Mbps 5GHz AP Benefiting Bridge/RST Data Ethernet Indicator LED Lights O6 O6_6.jpg Signal Smart Station Station(Client) The This Three Transmission UI. When Wireless an achieved. adopts alignment. amplifier an and another antenna, applications. at be boost bridged button. can comes connected connection. current designed device devices ensure external feedback for from gigabit includes installing instant is login long mode, node. of on one operating optimum outdoor performance point port power provides push range represent set signal especially strength switch. switched technology the throughput to together two webs when wireless.
Comments